Effimac Product Range HR SLITTING LINE SLHR 1000-2000 | CR SLITTING LINE SLCR 500-1600 | CTL - CUT TO LENGTH | TUBE MILL ENTRY LINES | TUBE MILL | FLYING CUT OFF
bar Home div About Us div Products div Feedback div Contact div Site Map
banner
PRODUCT RANGE
HR SLITTING LINE SLHR 1000-2000
spacer
CR SLITTING LINE SLCR 500-1600
spacer
CTL - CUT TO LENGTH (HR SHEETS)
spacer
CTL - CUT TO LENGTH (CR SHEETS)
spacer
CTL - CUT TO LENGTH (TUBE)
spacer
spacer
TUBE MILL
spacer
 
Home >> Products > TUBE MILL ENTRY LINES
spacer
HORIZONTAL ACCUMULATOR

Type

Width (mm)

Thinckness (mm)

Storage (m)

Out Speed (m/min)

Occupied length (m)

EHSA32

40-120

0.6-1.6

400-600

mill speed

7

EHSA50

60-200

0.8-3.0

400-800

mill speed

10

EHSA76

100-260

0.8-4.5

400-1000

mill speed

14

EHSA114

120-400

1.2-6.0

400-1000

mill speed

18

EHSA165

160-520

2.5-7.0

400-1000

mill speed

20

EHSA220

240-700

3.0-8.0

400-1000

mill speed

26

Horizontal accumulator accumulates a large amount of strip in a reasonable amount of space. The material is first twisted in a vertical position and fed into the looper through a set of driven pinch rolls. The material is first accumulated on the outer portion of the turn table; there is no bent back loop so that the material is never unnecessarily over bent.

The Accumulator is first filled-in then emptied, its operation is easy to control. Because it uses a turn table and doesn’t damage the material at the edges and can handle thin strips and the noise level is kept minimum. The material can exit the Accumulator in wide variety of configuration which makes it easy to fit in any factory and its simple sturdy mechanism makes it a very reliable machine easy to maintain. Up to 8” Pipes

For Larger Sizes

Type

Width (mm)

Thinckness (mm)

Storage (m)

Out Speed (m/min)

Occupied length (m)

EHSA325

320-1000

4.0-10.0

400-900

mill speed

34

EHSA400

500-1300

4.0-12.0

500-1000

mill speed

45

EHSA508

700-1650

5.0-15.0

500-1000

mill speed

57