Effimac Product Range HR SLITTING LINE SLHR 1000-2000 | CR SLITTING LINE SLCR 500-1600 | CTL - CUT TO LENGTH | TUBE MILL ENTRY LINES | TUBE MILL | FLYING CUT OFF
bar Home div About Us div Products div Feedback div Contact div Site Map
banner
PRODUCT RANGE
HR SLITTING LINE SLHR 1000-2000
spacer
CR SLITTING LINE SLCR 500-1600
spacer
CTL - CUT TO LENGTH (HR SHEETS)
spacer
CTL - CUT TO LENGTH (CR SHEETS)
spacer
CTL - CUT TO LENGTH (TUBE)
spacer
spacer
TUBE MILL
spacer
 
Home >> Products
spacer

TUBE MILL

PRECISION TUBE MILLS

Type TUBE Dia. (mm) Thinckness (mm) Max. mill Speed (m/min)
PTM-32L 9.52-31.75 0.2-0.6 120
PTM-32 9.52-31.75 0.5-2.0 100
PTM-50 12.70-50.8 0.6-2.5 100
PTM-63 15.88-63.5 0.6-3.0 100
PTM-76 19.05-76.2 0.8-4.5 85
PTM-100 38.1-101.6 1.5-6.0 75

PIPE MILLS

Type TUBE Dia. (mm) Thinckness (mm) Max. mill Speed (m/min)
TM-65 21.3-75.5 1.6-4.5 85
TM-100 33.25-114.3 2.5-5.4 75
TM-150 60.3-168 2.9-5.4 50
TM-200 88.9-219 3.0-6.0 40
TM-300 114.3-325 3.5-9.5 30
TM-500 219-508 4.5-12.5 20

The Tube Mill is a combination of equipment installed in a line for the production of High Frequency Induction Welded (HFIW) carbon steel tubes. The process involved is cold forming of carbon steel strip in circular shape, longitudinal welding, sizing, converting into Rectangular/Square shape and cutting to pre determined length.
The complete line is divided in three sections:

  • Entry Section
  • Forming, Welding, Cooling and Sizing Section
  • Cutting and Delivery Section

Raw material (Steel Strip) in form of a coil is uncoiled and fed into forming section passing through the equipment of entry section. Entry section enables the tube mill to run continuously by using strip joining and accumulation equipment. Tube is formed in round shape passing through a set of driven and idler rollers of forming section before welding. In welding section tube is longitudinally welded by using high frequency induction welding method. Outside bead is removed and formed in shape of scrap. The weld seam is ironed and tube passes through the cooling section. In sizing section, tube is formed to specified size and converted into Rectangular/Square shape. After sizing, tube is cut to specified length by using flying cutting equipment and delivered in collecting troughs passing through run out conveyor.