Model Number |
Width (mm) |
Thinckness (mm) |
Speed (m/min) |
Structure |
EPRL-32 |
40-120 |
0.6-1.6 |
15 |
2+5 |
EPRL-50 |
60-200 |
0.8-3.0 |
12 |
2+5 |
EPRL-76 |
100-260 |
0.8-4.5 |
12 |
2+5 |
EPRL-89 |
100-300 |
1.0-5.0 |
8 |
2+5 |
EPRL-114 |
120-400 |
1.2-6.0 |
8 |
2+5 |
EPRL-165 |
160-520 |
2.0-6.0 |
6 |
2+5 |
EPRL-220 |
240-700 |
3.0-8.0 |
5 |
2+5 |
EPRL-325 |
320-900 |
4.0-10.0 |
5 |
2+5 |
EPRL-508 |
600-1300 |
4.0-12.5 |
3 |
2+5 |
The combined pinch roll-levelling machine serves to pull the strip off the decoiler, to level it and to feed it into the end-squaring shear, and further into the strip welding unit.
The machine consists of a welded frame with 2 side members. holding the bearing chucks. and bolted to each other via spacers and cross pieces. The chucks for the lower pinch and levelling rolls are rigidly mounted in the side members. The top pinch roll is raised and lowered by hydraulic cylinder. The upper levelling rolls are parallel adjustable by screw down devices. Pairs of horizontal and vertical guide rollers, adjustable to suit the strip width, are mounted at the entry side of the machine. The upper pinch roll is powered by A.C. geared motor via universal point propeller shaft.
Pinch and levelling rolls as well as vertical guide rollers are made of alloyed steel, surface hardened and ground. and are running in roller bearings. |